1, Bayani

The inji ne tsakiya tuki irin scraper inji, dace da kawar da debris na kananan span floating tafkin da kuma m ruwa tafkin, a lokaci guda kuma dace da kawar da mai mai mai mai tafkin.

Tsarin injin yana da sauƙi, aiki mai aminci, sauƙin kulawa.

2, Babban sigogi:

tafkin tsawon 5000mm

Rail nesa 4080mm

Tafiya Motor 0.75KW

3, babban tsari da kuma aiki ka'idar na scraper

3.1 Tsarin:

Injin ya ƙunshi kayan aiki kamar dandamali, na'urar motsawa, na'urar haɗuwa, na'urar juyawa, na'urar ƙwaƙwalwa, tsarin sarrafa lantarki da na'urar sarrafa tafiya.

Drive na'urori, dandamali, juyawa inji, lantarki sarrafa tsarin a kan ruwa, farfajiyar rufe da lalacewa kayan, gyara da kulawa mai sauki. Float scraper da sauran hukumomi a karkashin ruwa.

3.2 Ka'idar aiki

Lokacin da kayan aiki aiki, float scraper fadi, da kuma dukan na'ura drive float scraper a wani gudun da float scraper na tafkin sama a cikin mulki rack; Lokacin da na'urar gudu zuwa karshen tafkin jiki, juyawa inji aiki, float scraper ɗaga. A lokaci guda, tafiya canzawa da collision block, lantarki tsarin aiki, tuki motor reversal cimma dawowa tafiya; Lokacin da na'urar gudu zuwa farawa matsayi na scraper, juyawa inji amfani a matsayin, scraper allon fadi, tafiya sauya tare da lantarki aiki, cimma jinkiri, motor juyawa da kuma gudanar da na gaba madauki.

4, Shigarwa da karɓa

4.1 Track da kuma laying bukatun:

4.1.1 Lokacin shigarwa bukatar tafkin tafkin ya zama daidai a saman, da kuma shigarwa hanyar da aka tsara baƙin ƙarfe a saman bukatar a cikin wannan jirgin sama.

4.1.2 tsawon line karkatarwa na hanyar ba ya wuce ± 3mm.

4.1.3 tsawon kwance na orbit ba ya wuce 1/1000.

4.1.4 dangantaka tsayi na biyu daidai keke ba ya wuce 3mm.

4.1.5 biyu daidai-daidai orbital haɗin matsayi ya kamata kuskure tsari, da kuma kuskure nesa ya kamata ya fi karfe nesa.

4.2 na'urar shigarwa umarnin:

4.2.1 sanya kayan dandamali a kan karfe rail, cire sarkar motsi, tura daga karshen jikin tafkin zuwa karshen karshen, daidaita hanyar dangane da yanayin hana katin ba.

4.2.2 Biyan taron zane-zane za a juya injin, float scraper na'urar, da dai sauransu da aka tara.

4.2.3 An sanya dukan injin a farkon karshen gargajiya, don ƙayyade matsayin bugun da aka yi a karshen gargajiya. Sa'an nan kuma tura scraper zuwa wani ƙarshe don ƙayyade wurin da ta iyaka buga. Duba tsawo daidaitawa juyawa injin nuts na scraper board, ƙayyade su m matsayi.

4.2.4 biyu ƙarshen rail sanya karfi baƙin ƙarfe iyaka na'urar don hana tafiya sauya kasawa, haifar da tafiya daga biyu ƙarshen rail.

5, Gyara da gwajin aiki

5.1 Gwajin aiki

Bayan da aka kammala shigarwa na kowane sassa, kowane sassa an bincika shi da ƙarfi da aminci ba tare da kuskure ba bayan gwajin aiki.

5.2 Gyara da kulawa

Ya kamata a yi a lokacin gyara da kulawa:

5.2.1 allura mai 1-2 sau a wata tare da wurin zama bearings.

5.2.2 Bincika kafin farawa ko iyaka sauya ya kasa ko lalacewa don kauce wa kuskure.

5.2.2 Bincika ko ruwa sassa haɗin sauki.