member
KS-10 irin shaft haɗin ƙofar ma'auni
KS-10 irin shaft haɗin ƙofar ma'auni dace da kogi, tafkuna, tanks, jirgin ruwa ƙofar, ruwa wutar lantarki tashar da kuma samar da, ruwa injiniya ƙofar
@ action
|
1 Ayyukan amfani
KS-10 irin shaft haɗin ƙofar ma'auni dace da kogi, tafkuna, tanks, jirgin ruwa ƙofar, ruwa wutar lantarki tashar da kuma samar da, ruwa injiniya ƙofar buɗewa lura da aunawa, za a iya amfani da coaxial haɗi, sarkar ƙafafun haɗi, kayan aiki haɗi da sauran kai tsaye haɗi hanyoyin da aka auna ƙofar haɗi, da kayan aiki kanta tsara tare da hadaddun tafiya sarrafawa sauya, za a iya kai tsaye saita tafiya iyaka sarrafawa maki. A lokaci guda, wannan jerin kayan aiki kuma za a iya haɗa da ƙofar bude da rufe na'urar sarrafawa, lantarki nuni don samar da nuni, sarrafawa tsarin; Haɗi tare da kwamfuta tsarin samar da wutar lantarki tashar, ƙofar, ruwa matakin m auna sarrafa tsarin; Haɗa tare da na'urorin sadarwa, amfani a matsayin kayan aikin ƙarshe na dijital don tsarin ƙididdigar atomatik na ruwa, tsarin ƙididdigar tauraron dan adam na ruwa.
Ana iya amfani da kayan aikin don auna buɗewa a kan Flat Panel ƙofar, curved ƙofar, dunguwa bude da kuma rufe inji, da kuma tafiya iyaka iko.
2 Ka'idodin aiki
KS-10 irin shaft haɗin ƙofar ma'auniYa ƙunshi inji ko photoelectric encoder, tafiya canzawa na'urori da kuma dace coupler. Ƙofar motsi yana motsa mai ƙididdiga ta hanyar mai haɗuwa don fitar da siginar ƙididdigar grey daidai da ƙofar da siginar katsewar inji daidai.
The ƙuduri na KS-10 irin shaft haɗin ƙofar gauge ne0.5cm kuma 1cm.Tsarin aikinsa shine: Lokacin da ƙofar ta yi motsi na tsaye ko motsi na juyawa, mai haɗi da ƙofar ya zama motsi mai aiki tare, mai haɗi ya sake tura juyawar shaft na mai ƙididdigar, za a iya fitar da siginar lantarki ta hanyar fitarwar lantarki ta mai ƙididdigar da ta dace da matsayin juyawa (lambar grey). Ga Flat Panel ƙofar, fitarwa siginar fassara ta hanyar hardware ko software don nunawa, lura; Ga curved ko humanoid ƙofar, ta atomatik canza grey lambar ko bayan dijital sarrafawa fitarwa ta hanyar lantarki nuni ko kwamfuta.
Yayin da encoder juyawa a lokaci guda, tsakiyar shaft na hadaddun tafiya sauya na'urar ta hanyar reducer ma juyawa a lokaci guda, kamar isa iyakar yanayin, wato fitarwa "wucewa" ko "kashewa" siginar zuwa mai kula.
3 fasaha sigogi
a.Ma'auni kewayon: KS-10-B (inji encoder): 0 ~ 10m;
KS-10-G (Optical encoder): 0 ~ 20m;
b.ƙuduri: 1cm (inji encoder); 0.5, 0.1cm (mai ƙididdigar lantarki);
c.fitarwa code: inji encoder: grey code 10 ~ 13bit;
Optical encoder: canji grey lambar 13 ~ 16bit;
e.watsa nesa: a cikin 500m;
f.Hanyar haɗuwa: haɗuwa da shaft, haɗuwa da kayan aiki ko haɗuwa da sarkar;
g.Fitarwa nau'i: (1) yanke lamba: 3A / 220VAC; (2) OC ƙofar: 30mA / 30VDC.
3.1 Sadarwa dubawa (optional)
(1) RS485 dubawa: MODBUS yarjejeniya ko wasu.
(2) 4 ~ 20mA analog yawan siginar fitarwa.
3.2 Amfani da muhalli
ayanayin zafin jiki: -25 ℃ ~ 85 ℃;
bdangi zafi: <90% (40 ℃);
D wutar lantarki: 12 ~ 24VDC.
3.3 lantarki nuni (zaɓi)
|
QNetworkAccessFileBackend
-
QShortcut
-
QShortcut
-
QShortcut
-
Email
-
Dakata
-
@ action
-
@ action
-