A. Aikace-aikace da kewayon:

Jimlar girman ruwa da ake amfani da shi don aunawa da sarrafawa ta hanyar bututun ruwa. Teburin yana da fasali na high aminci, high daidaito, low ikon amfani. Bayanan sun dace da ƙa'idodin ƙasa (GB / T778.1-3-2007) da ƙa'idodin masana'antar ginin birni (CJ / T133-2007).

2. Ayyuka:

1, aiki kumfa fitar da bayanai sau daya a kowace 24 hours.

2, samar da Multi tashoshi, Multi gudun ta atomatik canzawa, inganta tsarin karfin.

3, TDMA lokaci rarraba Multi-URL sadarwa hanya, atomatik daidaita sadarwa lokaci raka'a, za a iya gaba daya kauce wa data haɗuwa.

4. Yi amfani da fasahar tsalle-tsalle don kauce wa tsangwama na mita ɗaya.

5, uku hanyoyin aiki:

LOP1 (real-lokaci nesa farkawa, kwafin 12s kammala, baturi rayuwa fiye da shekaru 8)

LOP2 (rufe bawul amsa lokaci har zuwa 24h, bude bawul amsa lokaci 12s, baturi rayuwa fiye da shekaru 10)

LOP3 (sauya bawul amsa lokaci har zuwa 24h, baturi rayuwa fiye da shekaru 12)

6, Haɗin tattara, auna, sarrafa bawul, mara waya sadarwa, m agogo, ultra low ikon amfani, wutar lantarki management, anti magnetic hare-hare da sauransu ayyuka a daya.

7, wutar lantarki management aiki, gano fitar da jihar ko sarrafa bawul ƙarfin lantarki da kuma rahoto.

8, Magnetic hare-hare gano aiki, samar da alamar faɗakarwa lokacin gano m magnetic hare-hare.

9, goyon bayan aikin ajiya na kashe wutar lantarki, bayan ma'aunin ruwa mara waya ya kashe wutar lantarki, babu buƙatar sake fara ƙimar ma'auni.

10, tallafawa bawul iko, za a iya aika da umarnin sarrafa bawul ta hanyar mayar da hankali da sauransu.

11, goyon bayan daskarewa data karantawa, za a iya aika da umarnin karantawa watan daskarewa data, shekara-shekara daskarewa data ta hanyar mai mayar da hankali da sauransu.

12, tallafawa bawul kulawa aiki.

13, goyon bayan mara waya kusan nesa sigogi saiti.

14, amfani da magnetic trigger tebur karshen bayanai ko tebur karshen atomatik kumfa bayanai.

3, fasaha sigogi bayani:

1Fasaha nuna alama:

Aiki band 475 ~ 495MHz (auna keɓaɓɓun band, ba tare da aikace-aikacen mita)

Effective fitarwa ikon 17dBm

mitar kwanciyar hankali ± 5PPM

hankali <-136dBm

aiki zazzabi -20 ~ 70 ℃

Yin aiki bandwidth 125kHz / 250kHz

aiki ƙarfin lantarki + 2.8 ~ 6V

Karɓar yanzu ≤20mA

fitar da halin yanzu ≤130mA

fitarwa lokaci Max fitarwa lokaci ≤1.5s

Launch tsakanin har zuwa 24 hours

Canja wurin nesa Sight nesa ≥5000m

bawul lantarki sigogi ƙarfin lantarki 2.8 ~ 6V, halin yanzu ≤160mA

barci halin yanzu ≤8uA

Matsakaicin aikin yanzu ≤20uA

2, zirga-zirga nuna alama:

IV. Shigarwa:

1Zaɓin ruwa mita ya kamata ya dace bisa ga bututun sau da yawa amfani da kwararar kasa da ko kusa da ruwa mita na yau da kullun amfani da kwararar, ba za a iya kawai ƙayyade ruwa mita da bututun diameter.

2Shigarwa wuri don kauce wa karfi haske haske, daskarewa, gurɓataccen yanayi, a lokacin da akwai daskarewa, ban da ruwa mita na ruwa bututun bandage thermal insulation, a lokacin da ba a yi amfani da shi ya kamata a ruwa mita a cikin ruwa karshen bawul kashe, fitar da ruwa karshen bawul da kuma faucet bude, zai iya hana ruwa mita daskarewa lalacewa.

3Dole ne a shigar da mitar ruwa a kwance don yin hakan a zahiri sama.

4Shigar da bututun ya zama tabbatar da shigar da ruwa mita bayan wanke tsabta a cikin bututun dutse, lakar yashi, linen da sauran abubuwa, don kauce wa haifar da ruwa mita lalacewa.

5, Don auna daidai, fifo ya kamata ya fi mitar ruwa.

6Ruwa mita, kamar yadda aka shigar a cikin boiler shiga cikin bututun ruwa, ya kamata a shigar da bawul, hana zafi ruwa sake tafiya zafi mummunan ruwa mita.

7Ba ya kamata a haɗa mitar ruwa kai tsaye da bututun, kuma ya kamata a sami aiki a tsakanin mitar ruwa da bututun (kamar bututun haɗi, haɗin dunguwa, ɗaukar gasket, da dai sauransu). Lokacin da aka shigar da mitar ruwa, ya kamata ba a yi amfani da ƙarfin da bututu da kayan aiki ke haifar da shi ba don kauce wa lalata mitar ruwa.

8Dole ne a shigar da mitar ruwa a wurin da ƙasa ke zubar da ruwa da ruwa.

5. Jirgi da ajiya

1、 Ya kamata jigilar ruwa ba ta sha wahala sosai. Ajiye ruwa mita ya kamata a cikin asali kunshin, da yanayin zafin jiki na wurin da aka ajiye0℃-60℃ dangi zafi ≤95%Babu lalata gas a cikin iska.

2Ruwa mita ajiya a cikin ajiya, stacking tsayi ba fiye da10Akwatin, daya kawai kunshin ruwa mita stacking tsayi ba fiye da10Kawai, daya kawai kunshin da aka cire ruwa mita ba ya dace da adanawa.

Shida, uku kunshin：

Amfani da mu masana'antar ruwa mita a cikin shekara guda, duk lokacin da shigarwa da kyau, amfani da kwararar al'ada, lalle ne saboda ingancin masana'antu da ya haifar da ciki na'ura lalacewa ko lalacewa (ban da daskarewa lalacewa), a cikin tabbatar da gubar rufi cikakkiyar yanayin da masana'antar da alhakin gyara, musayar. (lalacewar da aka haifar da rashin daidaitaccen aiki saboda dalilai na mutum ba a cikin wannan iyakar ba)

7. Lura:

1, katin mai amfani ya kamata ya kasance nesa da high zafi, high zafi, high magnetic muhalli

2Lokacin da lantarki sassa ya kasa, da inji tebur karatu ya dogara

3An haramta cire jadawalin kansa, in ba haka ba sakamakon kansa.